Carter's General Contracting · Dallas, TX
Window Replacement
Full window replacement for Dallas homes — old, drafty or fogged units removed and replaced with modern, sealed, easy-operating windows.
Window replacement is the core of what Carter's General Contracting does — the company describes itself as a window replacement company, and its public listings put it squarely in window installation. The typical Dallas call sounds like this: windows that no longer open or lock, glass fogged between the panes, drafts you can feel on a January night, and rooms that bake every afternoon from June through September because single-pane or failed-seal glass cannot hold the heat out. Replacement solves all of it at once: the old unit comes out, the opening is checked, and a modern insulated window goes in — measured for that opening, sealed against Dallas weather, and finished with trim that looks like it belongs to the house.
Because Carter's is also a general contracting company, the replacement does not stop at the glass. Older Dallas homes — the brick traditionals of Lakewood and Lake Highlands, the cottages of Oak Cliff — regularly hide rotted sills, soft frames and openings that have drifted out of square over decades. A window-only installer often has to walk past that damage or charge a surprise change order; a contractor can repair the opening as part of the same job, so the new window is set into sound structure and stays weathertight. Call (214) 758-9519 to talk through your home.
What You Get with Our Window Replacement
Insulated modern glass
Double-pane insulated units replace single-pane and failed-seal glass — less heat gain in summer, less heat loss in winter.
Measured per opening
Every opening is measured individually; Dallas homes settle, and a window ordered to a nominal size is a window that leaks air.
Opening repairs included in scope
Rotted sills, damaged frames and out-of-square openings can be repaired by the same contractor before the new unit is set.
Proper sealing & flashing
Shimming, insulation and exterior sealing done as a system, so rain and drafts stay outside where they belong.
Smooth, secure operation
New balances, locks and hardware — windows that open for spring air and lock tight for security.
Clean finish work
Interior and exterior trim finished to match the house, and old units and job debris hauled away.
Options & Materials
Replacement comes in two honest forms, and the right one depends on your frames. Insert (pocket) replacement sets a new window inside your existing frame — faster and less disruptive, and the right call when the frame is sound and square. Full-frame replacement removes everything down to the rough opening — the right call when there is rot, water damage, or you want to change size or style. Style choices follow the house: double hungs and sliders for most rooms, casements where you want ventilation and a tight seal, picture windows where the view is the point. Glass packages scale with exposure — west-facing Dallas glass earns upgraded low-E coatings. At the consultation we tell you plainly which openings need which treatment, and price each one in writing.
How the Job Works, Step by Step
- 1
Free consultation & measuring
It starts with a free consultation. We look at your existing openings, talk through what you want to change, take exact measurements and note anything unusual — out-of-square frames, deep sills, HOA rules — that affects the plan.
- 2
Written quote, no pressure
You receive a written quote that spells out the product, the scope and the total price. No vague allowances, no pressure to sign on the spot. Take the time you need to compare.
- 3
Order & scheduling
Once you approve, your products are ordered or made to the exact measurements from step one. We confirm an installation date that fits your schedule and tell you how long the work will take.
- 4
Installation day
Our installers protect floors and furniture, remove the old units, fit the new ones, seal and trim the openings, and test every unit before they leave. Most homes are finished the same day.
- 5
Walkthrough & cleanup
We walk the finished work with you, show you how everything operates, register any warranty paperwork and take all packaging and old materials away. The room is left clean and ready to use.
Care & Maintenance
Wash glass and frames with mild soap and water; keep sill tracks vacuumed and weep holes clear so rain drains out instead of in. Lubricate locks, latches and balances once a year, and check exterior caulk lines each fall before the wet season — a ten-minute reseal protects the opening for years. Operate every window a few times each season so balances and hardware stay free. Keep your project paperwork; if a unit ever needs service, the sizes and specifications on it make the call simple: (214) 758-9519.
What Affects the Price?
No two homes in Dallas are the same, so honest pricing starts with a look at your actual project. These are the factors that move the number most:
- Number of openings and their sizes
- Insert vs. full-frame replacement (frame condition decides)
- Frame material and window style mix
- Glass package — low-E and upgraded solar control for west glass
- Repairs found in the opening: rot, sill or structural work
For general planning numbers, see our Price Guide — those are market ranges, not our prices. Your exact, written price comes free with your quote: call (214) 758-9519.
Window Replacement Photos
Photos marked as illustrative in their description show the style of the finished result; the others are from our own completed work. Click any photo for the full view.
Window Replacement — Frequently Asked Questions
How do I know my windows actually need replacing, not just repairing?+
Fog between the panes means the insulated seal has failed and the glass is no longer insulating. Sticking, rotting or windows that will not lock are structural, not cosmetic. Single-pane windows in Dallas are an energy problem every summer day. If two or three of those describe your home, replacement is usually the honest recommendation — and we will tell you if a repair is the smarter spend.
Insert replacement or full-frame — which will my home need?+
If your existing frames are sound, dry and reasonably square, an insert replacement is efficient and less disruptive. If there is rot, water staining or frame damage — common in older East Dallas homes — full-frame is the right job. We check each opening at the consultation and price it accordingly, opening by opening.
Will new windows really lower my Dallas electric bills?+
Failed and single-pane glass is one of the largest heat-gain paths in a Dallas home. Modern insulated low-E units cut that gain substantially, and rooms near west-facing glass are where homeowners feel it first. Exact savings depend on your home, glass package and HVAC — we will not invent a percentage, but the comfort change is immediate and the direction of the bill change is reliably down.
How long does a whole-house replacement take on site?+
Measuring and ordering come first. Once units are on hand, most Dallas homes are completed in one to two days of on-site work, room by room, with openings never left unsecured overnight. Your written quote includes the schedule before you commit.
How much do window replacement cost?+
The honest answer is that it depends on size, material and the condition of the existing opening. Beware of anyone who quotes a firm price without measuring. Carter's General Contracting measures first and then gives you a written quote with the full price — free — so you can compare it properly.
How long does a typical window replacement project take?+
Measuring and ordering take the first part of the timeline; the on-site work for most homes is completed in a day. Larger or custom projects take longer, and we give you the schedule in writing before you commit, so you can plan around it.
Do you offer free estimates?+
Yes — call (214) 758-9519 and we will arrange a free consultation and written quote. There is no obligation and no pressure to decide on the spot.
Do you serve my part of Dallas?+
Carter's General Contracting serves the areas listed on our Service Areas page. If your neighborhood is close to a listed area but not named, call us — we will tell you straight away whether we can reach you.
What should I prepare before installation day?+
Clear the area around each opening, take down curtains or blinds if we are not replacing them, and move fragile items away from the work zone. Our team protects floors and furniture, and removes the old units and packaging when the job is done.
Can window replacement be customized for unusual sizes or shapes?+
In most cases, yes. Arches, angled tops, oversized openings and out-of-square frames are measured individually and made or ordered to fit. Bring us the awkward opening — it is usually the one that benefits most from a custom solution.
What information helps my quote be accurate?+
Rough measurements (width × height in inches), a photo of each opening, and a note about what you want to change. Send those when you call (214) 758-9519 and your written quote will be faster and closer to the final number.
What happens if something is not right after the job?+
Call us. Carter's General Contracting stands behind its work: if something we supplied or installed is not right, we come back and make it right. That is how a local business keeps its name — one fixed problem at a time.
Questions about window replacement? Talk to a real person.
Call (214) 758-9519 or send the 2-step quote form — it takes under a minute.